background image

 

172-65606A-02  (JAH5RA-R/JAH7RA-R)    12  Jan  2021

 

14

 

DETAILED WRITTEN DESCRIPTION OF THE CLAIMED DEFECT AND HOW AND WHEN 
THE CLAIMED DEFECTIVE PRODUCT WAS USED; AND (b) THE CLAIMED DEFECTIVE 
PRODUCT AND A COPY OF THE PURCHASE INVOICE IS RETURNED TO TLV, FREIGHT 
AND TRANSPORTATION COSTS PREPAID, UNDER A RETURN MATERIAL 
AUTHORIZATION AND TRACKING NUMBER ISSUED BY TLV. ALL LABOR COSTS, 
SHIPPING COSTS, AND TRANSPORTATION COSTS ASSOCIATED WITH THE RETURN 
OR REPLACEMENT OF THE CLAIMED DEFECTIVE PRODUCT ARE SOLELY THE 
RESPONSIBILITY OF BUYER OR THE FIRST END USER. TLV RESERVES THE RIGHT TO 
INSPECT ON THE FIRST END USER’S SITE ANY PRODUCTS CLAIMED TO BE DEFECTIVE 
BEFORE ISSUING A RETURN MATERIAL AUTHORIZATION. SHOULD SUCH INSPECTION 
REVEAL, IN TLV’S REASONABLE DISCRETION, THAT THE CLAIMED DEFECT IS NOT 
COVERED BY THIS WARRANTY, THE PARTY ASSERTING THIS WARRANTY SHALL PAY 
TLV FOR THE TIME AND EXPENSES RELATED TO SUCH ON-SITE INSPECTION. 

Exclusion of Consequential and Incidental Damages 

IT IS SPECIFICALLY ACKNOWLEDGED THAT THIS WARRANTY, ANY OTHER EXPRESS 
WARRANTY NOT NEGATED HEREBY, AND ANY IMPLIED WARRANTY NOT NEGATED 
HEREBY, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 
FOR A PARTICULAR PURPOSE, DO NOT COVER, AND NEITHER TLV, TII NOR TLVJ WILL 
IN ANY EVENT BE LIABLE FOR, INCIDENTAL OR CONSEQUENTIAL DAMAGES, 
INCLUDING, BUT NOT LIMITED TO LOST PROFITS, THE COST OF DISASSEMBLY AND 
SHIPMENT OF THE DEFECTIVE PRODUCT, INJURY TO OTHER PROPERTY, DAMAGE TO 
BUYER’S OR THE FIRST END USER’S PRODUCT, DAMAGE TO BUYER’S OR THE FIRST 
END USER’S PROCESSES, LOSS OF USE, OR OTHER COMMERCIAL LOSSES. WHERE, 
DUE TO OPERATION OF LAW, CONSEQUENTIAL AND INCIDENTAL DAMAGES UNDER 
THIS WARRANTY, UNDER ANY OTHER EXPRESS WARRANTY NOT NEGATED HEREBY 
OR UNDER ANY IMPLIED WARRANTY NOT NEGATED HEREBY (INCLUDING THE IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) 
CANNOT BE EXCLUDED, SUCH DAMAGES ARE EXPRESSLY LIMITED IN AMOUNT TO 
THE PURCHASE PRICE OF THE DEFECTIVE PRODUCT. THIS EXCLUSION OF 
CONSEQUENTIAL AND INCIDENTAL DAMAGES, AND THE PROVISION OF THIS 
WARRANTY LIMITING REMEDIES HEREUNDER TO REPLACEMENT, ARE INDEPENDENT 
PROVISIONS, AND ANY DETERMINATION THAT THE LIMITATION OF REMEDIES FAILS OF 
ITS ESSENTIAL PURPOSE OR ANY OTHER DETERMINATION THAT EITHER OF THE 
ABOVE REMEDIES IS UNENFORCEABLE, SHALL NOT BE CONSTRUED TO MAKE THE 
OTHER PROVISIONS UNENFORCEABLE. 

Exclusion of Other Warranties 

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, 
AND ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, 
ARE EXPRESSLY DISCLAIMED. 

Severability 

Any provision of this warranty which is invalid, prohibited or unenforceable in any 
jurisdiction shall, as to such jurisdiction, be ineffective to the extent of such invalidity, 
prohibition or unenforceability without invalidating the remaining provisions hereof, 
and any such invalidity, prohibition or unenforceability in any such jurisdiction shall 
not invalidate or render unenforceable such provision in any other jurisdiction.   
 

   

13901 South Lakes Drive, Charlotte, NC 28273-6790, U.S.A. 
Tel: [1]-704-597-9070 

Fax: [1]-704-583-1610 

Содержание JAH5RA-R

















Отзывы: