172-65286MA-03 (DC3S-L) 6 Oct 2021
4
Specifications
Install properly and DO NOT use this product outside the recommended
operating pressure, temperature and other specification ranges.
Improper use may result in such hazards as damage to the product or
malfunctions which may lead to serious accidents. Local regulations
may restrict the use of this product to below the conditions quoted.
CAUTION
DO NOT use this product in excess of the maximum operating pressure
differential; such use could make discharge impossible (blocked).
CAUTION
Use only under conditions in which no freeze-up will occur. Freezing
may damage the product, leading to fluid discharge, which may cause
burns or other injury.
CAUTION
Refer to the product nameplate for detailed specifications.
* Maximum allowable pressure (PMA) and maximum allowable temperature (TMA) are
PRESSURE SHELL DESIGN CONDITIONS,
NOT
OPERATING CONDITIONS.
** Valve No. is displayed for products with options. This item is omitted from the nameplate
when there are no options.
Configuration
DO NOT use for toxic, flammable or otherwise hazardous fluids.
This product is a separator for steam that separates and discharges
condensate from steam piping systems. Use only for steam and/or
steam condensate. This product is for intended use only. Improper use
may result in such hazards as damage to the product or malfunctions
that may lead to serious accidents.
WARNING
Model
Maximum Allowable
Temperature (TMA)*
Maximum Allowable
Pressure*
Nominal Diameter
Maximum Differential
Pressure
Production Lot No.
Valve No.**
Maximum Operating
Temperature
No.
Name
1
Body
2
Separator Body
3
Trap Cover
4
Separator
5
Float
6
Float Cover
7
Guide Pin
8
Trap Valve Seat
9
Valve Seat Gasket
10 Trap Cover Gasket
11 Wave Spring
12 Body Gasket
13 Screen
14 Bushing
15 Float Cover Bolt
16 Spring Washer
17 Body Bolt
18 Trap Cover Bolt
19 Nameplate
20 Flange
Separator
Outlet
Steam Trap
Outlet
