TLV DC3S-L Скачать руководство пользователя страница 2

 

172-65286MA-03  (DC3S-L)    6  Oct  2021

 

Contents 

 
Introduction ....................................................................... 1

 

Safety Considerations ....................................................... 2

 

Specifications .................................................................... 4

 

Configuration ..................................................................... 4

 

Installation ......................................................................... 5

 

Maintenance ...................................................................... 6

 

Disassembly/Reassembly ................................................. 7

 

Troubleshooting .............................................................. 10

 

TLV EXPRESS LIMITED WARRANTY ............................. 11

 

Service ............................................................................. 13

 

 
 
 
 

Introduction 

Thank you for purchasing the TLV cyclone separator trap for steam. 

This product has been thoroughly inspected before being shipped from the 
factory. When the separator trap is delivered, before doing anything else, 
check the specifications and external appearance to make sure nothing is out 
of the ordinary. Also be sure to read this manual carefully before use and 
follow the instructions to be sure of using the separator trap properly. 

For use on steam mains and branches, the cyclone separator traps use 
centrifugal force to separate condensate from steam, and feature a built-in 
free float steam trap for the automatic discharge of the collected condensate.     

The combination of separator and built-in trap makes this product suitable for 
use in locations where a separator would be installed together with a trap. 

If detailed instructions for special order specifications or options not contained 
in this manual are required, please contact TLV for full details. 

This instruction manual is for the models listed on the front cover. It is needed 
not only for installation but for subsequent maintenance, 
disassembly/reassembly and troubleshooting. Please keep it in a safe place 
for future reference. 

Содержание DC3S-L















Отзывы: