background image

 

172-65254MA-04  (A-COS-10)    22  Apr  2020

 

2

 

Safety Considerations 

  Read this section carefully before use and be sure to follow the instructions. 

  Installation, inspection, maintenance, repairs, disassembly, adjustment and valve 

opening/closing should be carried out only by trained maintenance personnel. 

  The precautions listed in this manual are designed to ensure safety and prevent 

equipment damage and personal injury. For situations that may occur as a result 
of erroneous handling, three different types of cautionary items are used to 
indicate the degree of urgency and the scale of potential damage and danger: 
DANGER, WARNING and CAUTION. 

 

The three types of cautionary items above are very important for safety: be sure 
to observe all of them as they relate to installation, use, maintenance and repair. 
Furthermore, TLV accepts no responsibility for any accidents or damage 
occurring as a result of failure to observe these precautions.

 

Symbols 

  Indicates a DANGER, WARNING or CAUTION item. 

 

DANGER 

 

Indicates an urgent situation which poses a threat of death or 
serious injury 

 

WARNING 

 

Indicates that there is a potential threat of death or serious injury 

 

CAUTION 

 

Indicates that there is a possibility of injury or equipment / product 
damage 

 

 

WARNING 

 

NEVER apply direct heat to the float. 

The float may explode due to increased internal pressure, causing 
accidents leading to serious injury or damage to property and 
equipment.

 

 

CAUTION 

 

Install properly and DO NOT use this product outside the 
recommended operating pressure, temperature and other 
specification ranges. 

Improper use may result in such hazards as damage to the product 
or malfunctions that may lead to serious accidents. Local 
regulations may restrict the use of this product to below the 
conditions quoted.

 

 

DO NOT use the product in excess of the maximum operating 
pressure differential.

 

Such use could make discharge through the air trap impossible 
(blocked).

 

 

Use hoisting equipment for heavy objects (weighing 
approximately 20 kg (44 lb) or more)

Failure to do so may result in back strain or other injury if the object 
should fall.

 

 

Take measures to prevent people from coming into direct 
contact with product outlets. 

Failure to do so may result in burns or other injury from the 
discharge of fluids. 

Continued on the next page 

Содержание A-COS-10
























Отзывы: