Use and Maintenance Handbook
– Prime 400 Packaging Machine
Page 57 of 71
before/after the advancement of the film. The selector (C) allows you to select the
cutting mode after welding or cutting immediately at cutting quote.
11.4.9
Temperature page
This screen allows you to manage the machine's resistance. The
activation/deactivation buttons of the resistances relating to the jaws (A) and the
rollers (B); resistances are active if the bottom of the buttons are green marked,
(gray when inactive).
The boxes (C) and (D) represent the status of the resistances: if marked green
indicate that the resistances are in the heating phase, until reaching the set
temperature; if marked gray indicate that the resistances have reached the
desired temperature.
The boxes (E) and (F) respectively indicate the temperature value detected on
the jaws and on the rollers.
In the box (G) you can set the desired temperature on the resistance of the jaws;
the box (H) allows setting the temperature value related to the resistance of the
welding rollers.
The (I) button displays presence of alarms.
G
C
E
A
B
D
F
H
I
