Use and Maintenance Handbook
– Prime 400 Packaging Machine
Page 47 of 71
11.2
Safety regulations for a proper functioning
Never work with the casing dismantled.
Always keep the machine clean and efficient.
Never touch buttons or switches with wet hands.
The machine must only be used by operators trained in its use.
The clothing of the assigned operators must correspond to these safety
standards: it is compulsory to wear gloves, safety footwear and overalls
without loose or hanging parts.
Turn the machine on sticking strictly to the sequence described.
If during operation you hear noises that point to faulty operation (increase in
noise, whistling, discharges etc.) promptly press the EMERGENCY button,
consult the manual or call in a representative of
TLM PACKAGING
.
If the fault persists, turn the general on off switch to 0 and call maintenance
operative.
A floor that is greasy, wet or covered in oil may cause accidents. Dry and
clean the floor of oil patches that have formed during work on the machine or
normal operation of the machine.
When non operational, the machine, should be left with the Emergency button
pressed.
Make sure that the machine is positioned and secured properly. Leave
enough space around to prevent contact with other machines and to facilitate
any maintenance operations.
Make sure that all the wiring is in its raceways.
Make sure that the electrical system is grounded.
Always keep the electrical junction boxes closed.
Do not position the wires in the passage area to avoid contact with the
water/oil.
