Use and Maintenance Handbook
– Prime 400 Packaging Machine
Page 22 of 71
Do not attempt to make repairs you are unfamiliar with. Carefully follow the
Usage instructions.
If, during the clearing operations pressurised air is used, where a protective
visor.
Check the efficiency of the power supply cut off device.
Check the efficiency of the machine’s earthing.
There must NOT be people assigned to the use of the machine near the
machine when it is operating.
Do not put your hands inside the machine during functioning and, in
particular, do not insert your hands or fingers between moving parts.
Avoid making any manoeuvres that do not have anything to do with the
dosage and filling when the machine is operating.
DO NOT approach the machine with garments that can get caught; DO NOT
wear ties, shawls, scarves or loose clothing.
The sleeves of clothing must be gathered at the wrists.
Carefully read and conform with the notices applied. Do not cover them for
any reason and replace them if they are damaged.
DO NOT lean on any point of the machine for any reason.
DO NOT rest tools and objects on moving parts.
DO NOT rest containers of liquid near electrical parts.
DO NOT clean the machine with direct jets of water, liquids or corrosive
substances.
DO NOT obstruct or damage the sensors and safety devices or use them for
purposes other than those intended by the Manufacturer, but check their
efficiency often and clean them frequently.
DO NOT modify parts of the machine such as attachment points, holes,
finishings etc. for any reason to adapt them for other devices. The
Manufacturer shall not be liable for the consequences in the case of
malfunctioning due to the non-compliance with the above. We advise you to
ask the manufacturers to make any modifications.
