Page 7
Standby mode energy savings
When you turn off your TV, it may remain in a higher power mode for a few minutes, after which it goes
into a very low power standby mode. If you turn on the TV again before it has entered the very low
power mode, it turns on immediately. After the TV goes into the lower power standby mode, it takes a
bit longer to start up.
Watching broadcast TV channels
To watch broadcast TV, select the
Antenna TV
tile in the
Home
screen. Your TV remembers the last
channel you watched and starts with that channel playing.
Tip
:
You also can use the buttons on the TV panel to select Antenna TV, as explained in "
Panel
buttons
” on page
6
.
Changing channels
To change channels, you can do any of the following:
•
Press the
UP
arrow to change to the next higher channel.
•
Press the
DOWN
arrow to change to the next lower channel.
•
Press the
LEFT
arrow to display the channel list, and then press the
UP
and
DOWN
arrows to
move the highlight through the list one channel at a time. Or press
REWIND
and
FAST
FORWARD
to move the highlight through the list one page at a time. When you’ve highlighted
the channel you want to watch, press
OK
. (If you decide you don’t want to change channels,
press the
RIGHT
arrow
or
BACK
button).
•
Press to jump to the previous channel. Press again to return to the channel you were
watching before you pressed .
Note:
If is not available on your remote control, you can use on the Roku App or the
Jump
Back
button on a universal remote. For more information, see “
Other devices
” on page
2
.
