Page 5
Connect your TV
This section explains how to connect your devices to your TV.
Connecting an antenna, cable, or satellite box
If you are using an antenna, CATV cable without a set-top box, or a cable or satellite box that has only
an antenna output, connect a 75-ohm coaxial cable (not provided) from the device to the ANT/CABLE
input on the TV.
Tip
:
If you are using an antenna with a 300 ohm twin-lead cable, you need to use a 300-75
ohm adapter (not provided) to adapt the cable to a connection that is compatible with the
TV’s antenna input.
Tip
:
If you receive your TV stations through a set top box from a cable or satellite TV provider,
connect it to the TV using the best connection method available. From most to least desirable:
•
HDMI® input
– Digital HD and SD video
•
AV input
– analog SD video
•
Antenna input
– analog SD video using NTSC
Connecting a component with a composite AV video cable
If the best connection available on your component is AV or composite video output, connect it to the
TV using a composite AV cable (not provided). Composite AV cables typically have three RCA-type plugs
on each end, color coded as follows:
•
Yellow: Video
•
Red: Audio, right channel
•
White or black: Audio, left channel
Connect each plug to the corresponding connector on the
component and on the TV.
