TLA TUNING SET CTS-7-C, Руководство пользователя

Страница: 25 / 36

17
Select the option „ANALYZER“ and press „E“ again.
Select the highest tone of your piano which has a 2 string chorus
and press “E”.
Select the highest tone of your piano which has a 1 string chorus
and press “E”.
Play the note "a-1" to measure the concert pitch of your instrument
and use the "Func" buttons to align the tuner. (See also capter 2.6
of the manual) or you already can tune the chorus of "a-1" to your
desired pitch.
By pressing the "E " you are starting with the measurement of the individual partials of the piano-
analysis. The indicator for this is structured as follows:
Start now with the measurements (you now measure the second partial of a-1. To do this, play
the note which is automatically adjusted by the tuner (right now a_1) and align the tuners
frequency until the movement of the strobo display is stopped.
For fine adjustment use the "Func" buttons. For rough adjustment, you hold the "S" button and
tap one of the keys "Func". Pressing both buttons, "Value" at the same time, starts an automatic
scan. The audible tone can be used also.
Press „E“.
Play the specified note (for the moment again a_1, since you now
measure the 3rd partial of a-1) and align the tuner again. Press
“E”.
Play the specified note (for the moment again a_1, since you now
measure the 4rd partial of a-1) and align the tuner again. Then
press “E”.The tuner will now continue to the next note. It then emits
a short beep and for 1 second „next note“ is indicated on the dis-
play.
Play the specified note (for the moment again a_2, since you now
meassure the fundamental tone of a-2) and align the tuner again.
Press “E”.
Certainly, you now know how the device pretends the operating steps. Now perform all mea-
surements.
Important note: When the instrument is grossly out of tune, immediately after the tuner changes
the note, you should align the actual tone to the tuner using a tuning hammer. This is necessary
because the inharmonicity of the piano string depends on its tension. This, however, only be
carried out immediately after the change of tone. So just before the measurements 5 / 9 /, 13 /
and 17/
After the last measurement you get this display. This are eight
cents-values (support values), that were determined automatically
on the basis of previous measurements.
Cent
_d__ <> S10
2-STRING CHOIR
_G#_ <> S10
1-STRING CHOIR
_a_1 K10
440.00
_a_1 1.5: Y10
2/20 *** P2
Note predetermi-
ned Cents measured
Actual number of meas. Partial note number
Number of measurement
-26 -16 -8 -2
0 3 11 36
Progress display
SELECT A10
ANALYZER <>
Cent
Cent
_a_1 6.0 Y10
4/20 * P4
_a_1 3.5 Y10
3/20 ** P3
_a_2 2.5 Y10
5/20 **** P1