TLA TUNING SET CTS-7-C, Руководство пользователя

Страница: 24 / 36

16
At this point, setting the option “Hist.Temperament“ to “on“,
will allow you to select an historical temperament before
entering the tuning mode. Press the ”E“ key.
Only if there is a thermosensor connected to the Tuning Set,
you are asked to enter the next two items.
Using the “func“ keys, enter the room temperature at
which you expect the tuning of your music instrument to
be (simply the temperature at the time you have stored
the cent values).
Press key “E” again. Using the “func“ keys, enter a cent
value, corresponding to the pitch difference of your music
instrument when the room temperature rises by 1 degree
centigrade.
To confirm press key “E“.
You instrument program will now be stored.
You surely intend to tune your instrument using the stored
instrument program! So please find your instrument program,
as described in chapter 0.
By pressing key ”E“ you enter into the tuning mode. The concert pitch
will be shown. When tapping the “Note” keys, you will find the cent
values in the cent-indicator.
3.10 The PIANYZER, how to make individual piano tunings.
Using the „Pianyzer“ (Piano Analyzer) you get more beautiful piano tunings. Here the stretching of
the instrument will be optimized individually.
In the same way as you can store instrument tunings, this stretching is also stored. So you may
save 50 of them.
The stretching can be created in two ways.
1. By an analysis of the piano to be tuned (ANALYZER).
2. By entering cents for certain specific tones (EDITOR).
3.10.1 How to create a stretching by the analysis of a piano (ANALYZER)
If you have practiced, you need for the analysis less than 5 minutes. Due to the interference-free
analog strobe display you get a safe, reproducible result.
By measuring the cent-deviation of certain partials of 5 special tones, reference values are de-
termined. (See the sample diagram of an individual piano stretching at the end of this chapter).
Based on these support-values, an optimized stretching will be calculated and stored. To this end,
the device makes all settings automatically. Important! For all measurements, please damp with
a felt wedge the string chorus so, that sounds just one string.
To work with the Analyzer, do the following:
After switching on the unit, look for an unused instrument pro-
gram i.e. „INSTRUMENT____10“. There you search the option
"PIANYZER" using the "note" keys“
After pressing the key “E”, keep the die „S“ button pressed while
at the same time tapping “F” button, to skip the write protection.
th.sensor offset
20.0 deg.centig
th.sensor rate
0.0 cent/celsi
ENTER INST. 214
PIANO__________14
TUNE 114
PIANO__________14
_a_1 0.0 T14
440.00
←
1 ---
Hist. Temperament
off
PIANYZER ->110
INSTRUMENT____10
TUNE ->110
INSTRUMENT____10