TLA Tuning-Set CTS-32-C, Руководство пользователя

Страница: 26 / 39

19
2.3.7 How to create a tone sequence (tone raw)
In a factory or for special music instruments, it could be useful to set a predefined sequence of
tones. In each of the 99 instrument programs you can store one tone raw. If a tone raw is set, the
note adjustment works via the "special" keys.
To set a tone raw, apply the following (For example we will take our instrument program number
22 again)
Search the following display with
help of the two „function“
buttons:
After pressing the „Enter“ button
and pressing "shift" + "function",
the following indicator appears in
the display:
By pressing "Escape" you will the application. By pressing "Enter" note switching will be assigned
to the "special" keys. (See also chapter 2.3.3.5).
Go ahead with "Enter". With the
"note" key you will select now
the first note of your sequence.
Press "Enter" again.
Now start with step [01] enter-
ing the semitone steps of your
note raw.
With "Enter" you will quit the application.
2.3.8 Resetting one single instrument program to factory settings
All device settings in the example we have made, can be undone. In this case all the other instru-
ment programs remain unchanged. Operate as follows:
Search the following display
with help of the two „function“
buttons:
After pressing "Enter" and then
"Shift" + "Function" your in-
strument program will be reset.
2.3.9 How to save the concert pitch
See chapter 2.1.7
2.4 The main selection
When the device is first started up, it is in the instrument selection mode.
If at this point you press the
“ESC” key, the main selection is
activated. You will obtain the
following indicator:
With the two „Actual“ buttons you now can select one of the options described below.
<3> work-selction, then <Enter>
PIANO_STRETCH_5C[22]
set note raw
use special keys for tone raw ?
yes: <Shift+Function> no: <Escape>
First note a-1
Set note raw
step[01] semitone 0
<1> main selction, then <Enter>
instrument program selection
<3> work-selction, then <Enter>
PIANO_STRETCH_5C[22]
reset instrum
<3> work-selction, then <Enter>
STILL_EMPTY_____[22]
reset instrum