TLA Tuning-Set CTS-32-C, Руководство пользователя

Страница: 17 / 39

10
2.2.1.3 Organ historical (ORGAN_HISTORICAL)
The desired historical temperament (see chapter 4.4), the <cent-reference> and the <transposer>
can be adjusted before entering the tuning program.
The cent adjustment will be determined by the selected historical temperament. All other settings
are the same as "organ equal temperament".
2.2.1.4 Harpsichord
The desired historical temperament (see chapter 4.4), the <cent-reference> and the <transposer>
can be adjusted before entering the tuning program.
The cent adjustment will be determined by the selected historical temperament. In the lowest oc-
tave, the tuning is done on the basis of the fourth partial tone and in the second lowest octave,
through the second partial tone. Here, tone stretching was not preprogrammed, as the
inharmonicity is comparably unnoticeable due to the relatively thin, long strings of the instrument.
The adjustment of the gain of the microphone amplifier occurs automatically.
2.2.1.5 Harpsichord_415
The same as harpsichord, but with concert pitch 415 Hz.
2.2.1.6 Accordion
Cent adjustment, partial and microphone amplification will be controlled by memory. The program
was designed as a basis for creating your own programs, which are assigned to special instru-
ments. Further details are found in chapter 2.3.
2.2.1.7 Guitare and diatonical raw
These programs was designed as example for entering tone sequences. (see chapter 2.3.7.). The
buttons "special" are used here, to adjust the note.
2.2.1.8 Recorder
Cent adjustment, partial and microphone amplification will be controlled by key.
2.3 Creating an individual instrument program
The easiest way to create a new instrument program is to copy a similar, already existing program
and to then change and adapt it to ones own requirements.
2.3.1 Copying an existing instrument program
For this task, please select an in-
strument program as described in
chapter 2.2.1. As for example:
To obtain the copy function press the
upper “function” button until the follow-
ing command appears in the display:
By pressing “Enter” the following
indicator is shown:
With the “Actual” button pair you now
can select a free memory space, for
example No. 22.
<3> work-selction, then <Enter>
PIANO_STRETCH_03[ 3]
tune
<3> work-selction, then <Enter>
PIANO_STRETCH_03[ 3]
copy instrument
PIANO_STRETCH_03_[ 3] copy to
STILL_EMPTY______[12] with<Enter>
Actual
PIANO_STRETCH_03_[ 3] copy to
STILL_EMPTY______[22] with<Enter>
Function