TLA Tuning-Set CTS-32-C, Руководство пользователя

Страница: 21 / 39

14
2.3.3.11 Write protection
„ON“: The stored instrument programs cannot be overwritten.
„OFF“: No write protection function
2.3.4 Storage of a particular stretching of an already tuned instrument
Each instrument program is assigned a memory bank. There you can store cent values for the
whole tone range of your instrument, tone by tone.
For this purpose, please select an instrument program, if you have not yet done so, in which you
intend to record the stretching.
You can choose for instance, the
program we use as an example,
which you have already copied.
For storage search the following
display with help of the two
„function“ buttons:
After activating the “Enter” key,
the following indicator appears in
the display.
Now press the „Shift“ + „Function“ buttons.
You will now be requested to
align the tuning device to the
concert pitch a1 of the
instrument to be stored.
Now align the concert pitch of the tuning device to your instrument by playing the tone indicated (in
this example a’) and then changing the concert pitch via the “Value” buttons, to the effect that the
strobo display is balanced. For this the automatic function is very helpful, which can be activated
by pressing both “Value” buttons simultaneously (also see chapter 2.1.6.1)
Next please press the “Enter”
key and observe the following
display:
Now adjust the tone setting with help of the „Note“ buttons to the lowest tone of your instrument,
for instance this would be C-1 for a piano. Now play this note. With the „Special“ button, you then
select the partial tone which presents the clearest indicator on the strobo display.
Via the „Value“ buttons you then adapt the tuning device to the tone played. For this task also, the
automatic function, which is activated by pressing both “Value” buttons simultaneously, can be
very helpful. Once the tuning device is adapted (which implies that the strobo display is balanced),
the necessary cents correspond to those displayed above the “Value” buttons.
Now press the “Enter” key. The current setting of the device for that particular tone is now stored.
The unit then automatically switches to the next tone. You may now repeat this procedure as de-
scribed until all notes of your instrument are stored.
If so required during this procedure, you may switch to „AMPL“ with help of the „Function“ buttons.
This allows you to alter the microphone amplification in order to achieve a better display quality.
The microphone amplification is also stored tone by tone.
<3> work-selction, then <Enter>
PIANO_STRETCH_5C[22]
tune
<3> work-selction, then <Enter>
PIANO_STRETCH_5C[22]
store
+ meassure pitch
0.0 cent partl 1 pitch 440.00 a-1
+ store stretching
0.0 cent partl 1 CENTS 0.0 a-1
PIANO_STRETCH_5C[22] change ?
yes: <Shift+Function> no: <Escape>