TKO 3R, Инструкция по сборке

Страница: 16 / 30

16
STEP 4 – Display Console and Handlebar Assembly
a.
Attached to Console Bottom Sleeve (38) to the back of the Display Console (37).
Secure it with 4 Screws, Pan Head (M5xp0.8x25mm) (97).
b. Loosen and remove the Bolt (144), Regular Washer (90) and Lock Washer (88)
from the Handlebar (8). There are 4 of them.
c. Install the Handlebar (8) to the Upright Post Assembly (7) and tighten with 5
Washers (8x16x2.0t) (90), 5 Lock Washers (M8) (88) and 4 Bolts, Button
Head (M8xp1.25x16mm) (144) & 1 Bolt, Socket Head (M8xP1.25x55mm)
(114). Tighten it securely with Wrench.
d. Attached the Display Console Assembly onto the metal plate that welded on the
Upright
Assembly (7). Secure it using 4 Bolts, Socket Head
(M6xp1.0x15mm)(111). Tighten it securely with Wrench.
g. Connect the Cable (130) in the back of the Console to the Cable (131) in the
Upright.
h. Connect the Pulse Sensor Cable 1 (136) in the back of the Console and the Pulse
Sensor Cable 2 (137) in the Upright.
i. Make sure the Cables are connected securely and you DO NOT pinch the Cable.
USE HARDWARE
KIT B