TKO 3R Скачать руководство пользователя страница 14

Страница: 14 / 30

ASSEMBLY INSTRUCTIONS

STEP 1 – Base Stabilizer

Attached the Front Stabilizer (5) to the Main Frame (1). A circular decal (“R”)
should be located on the right side of the Front Stabilizer (5).

Secure it using 2 Lock Washers (M8) (88), 2 Regular Washers (8x16x2.0t)(90)
and 2 Bolts, Socket Head (M8xp1.25x90mm) (115).

c. DO NOT tighten these bolts yet.
d.

Attached the Rear Stabilizer (6) to the Main Frame (1) using 2 Lock Washers
(M8) (88), 2 Regular Washers (8x16x2.0t) (90) and 2 Bolts, Socket Head
(M8xp1.25x90mm) (115).

Securely tighten these 4 Bolts with Wrenches.

Install the Floor Leveler (147) to the bottom of the Main Frame Assembly. Adjust
it accordingly.

STEP 2 – Pedal Assembly

Attached the Right Foot Pedal (21)to the Right Crank (60) behind the Crank Disk
(15). Threaded clockwise and tighten it securely with Wrench.

Attached the Left Foot Pedal (20)to the Left Crank (59) behind the Crank Disk
(15). Threaded counterclockwise and tighten it securely with Wrench.

USE HARDWARE KIT

Содержание 3R































Результаты поиска

Содержание 3R

Отзывы:

Похожие инструкции для 3R

Бренды по названию

Популярные бренды

TKO 3R, Инструкция по сборке

Результаты поиска

Содержание 3R

Отзывы:

Похожие инструкции для 3R

Бренды по названию

Популярные бренды