TKH
TKH Security | Siqura SA FIX Series |
Installation manual
7
Installation procedure
Open the housing
Loosen the screw at the
bottom of the external rail.
The screw is fixed to a nut
welded on the housing.
Unscrew the two M6 screws
on the rear flange.
Slide the housing outer body
away from the back flange.
Be careful not to lose
screws, washers and O-
rings
Hang the housing body inserting the pin into the slot
on the bracket in order to perform electrical
connections and maintenance tasks inside the
housing.
Powersupply connections.
24 Vac
supply voltage (on "LINE" connector: line on L pin and
neutral on N pin).
230 (115) Vac model:
supply voltage (on "LINE" connector:
line on L pin and neutral on N pin).
Connect the earth cable to the 2-way screw terminal block.
Screw
Screws &
Washers
Pin
Slot
24Vac “L”
230Vac “L”
230
Vac “N”
OR
24Vac “N”
