TKH Security Proposal | RFP Name | RFP Number
TKH Security | Siqura SA FIX Series |
Installation manual v2
10
Maintain the unit
Please read and be familiar with the following instructions before servicing the unit.
Ensure proper operating condition of the unit performing safety checks upon completion
of maintenance.
Disconnect the unit from the supply circuit before cleaning. Do not use caustic or
abrasive cleaning products.
Use only replacement parts specified by the manufacturer.
Inspection, maintenance and repair of the equipment must be carried out in accordance
with the applicable standards.
Disconnect the unit from the supply circuit and report to qualified service personnel
whenever any damage or deformation to the equipment has been detected.
Do not use electrical equipment that seems worn or old.
Inspections
This equipment has been designed to fit in harsh environments requiring little or no
maintenance. Suggested inspection interval is six months, but extremely harsh
environments may require more frequent inspection and maintenance checks. On each
inspection, check the O-ring seals and the window wiper blade integrity. Replace when
necessary.
Routine activities
Regularly perform the following routine activities:
Clean the glass
Use luke warmwater or a liquid detergent. Clean with a damp cotton cloth.
Clean the germanium window
Use water or a liquid detergent. Clean with a damp cotton cloth. Be careful not to
scratch the carbon coating. Do not use ethyl alcohol, solvents, hydrogenated
hydrocarbons, strong acids or alkalis. These will irreparably damage the germanium
window. Once the cleaning is completed, properly reassemble the protective guard.
Clean the unit
The layer of filth upon the unit should never exceed 5 mm thickness. Use a dry or
damp cloth. Do not use compressed air to clean the unit.
Check electrical connections
Check cables and electrical connections for integrity and tightness. If the cables
seem worn or damaged, refer to the Extraordinary maintenance section.
