FITTING INSTRUCTIONS
Product:
T13 Outback Deluxe Frontal Protection System
Vehicle:
Holden Colorado 2016+
Part No.
070SB13L32R
For product warranty, please refer to our website, www.tjm.com.au
File: F-13409
Page 25 of 28
28/03/2017
90.
Pass the parking sensor loom through the FPS
and connect to parking sensors.
Use the parking sensor harness clips to
secure excess to the fog lights, as shown.
91.
With the assistance of another person,
carefully lift the FPS into position on the winch
frame, then loosely secure it in place, using
supplied “sliding washer plate” and M12 x
1.25 x 40mm hex bolts (4), 1/2" x Ø1-
1/4” Flat
Washers (8) & M12 nyloc nuts (4) at the
indicated locations.
IMPORTANT: SLIDING WASHER PLATE
MUST BE ORIENTATED CORRECTLY AS
SHOWN!
REPEAT ON LHS.
CHAMFER
TO TOP
RHS SHOWN
LHS SHOWN