![background image](http://html1.mh-extra.com/html/tjm/070sb13l32r/070sb13l32r_fitting-instructions-manual_1120898014.webp)
FITTING INSTRUCTIONS
Product:
T13 Outback Deluxe Frontal Protection System
Vehicle:
Holden Colorado 2016+
Part No.
070SB13L32R
For product warranty, please refer to our website, www.tjm.com.au
File: F-13409
Page 14 of 28
28/03/2017
42.
Loosely secure the lower winch frame mounts
to the vehicle using M10 x 1.25 x 40mm hex
bolt (4), M10 x Ø30mm flat washer (4) & M10
spring washers (4). Ensure these bolts also
pass through the OE tow points.
Use as many 2mm spacers as required to
ensure there is minimal gap between the
winch frame and chassis cross member.
43.
Centre the winch frame to the vehicle body
and tighten the fasteners installed in steps 40
and 42 to the torque settings specified on
page 1.
44.
Using M10 x 1.25 x 40mm hex bolts (2),
Chassis end plate washer (F-13880), M10 x
Ø30mm Flat Washers (4) and M10 Nylocs (2),
loosely secure the winch frame to the chassis
mounts at the indicated positions.
USE M10 X Ø30MM FLAT WASHERS
WHERE NECESSARY AS SPACERS BETWEEN
THE WINCH FRAME AND CHASSIS MOUNT
ENSURE BOLTS ARE ORIENTED
CORRECTLY, AS SHOWN OPPOSITE. LOWER
BOLT HEAD ON FRONT FACE AND UPPER
NUT ON FRONT FACE.
RHS SHOWN