TJM Pro Series Single Air Compressor: Installation and User Manual
For product warranty please refer to our website www.tjm.com.au
File: F-17800
Page 9 of 19
10/12/2021
3.3
Securely Mounting the Compressor
Consideration must be applied when selecting the mounting configuration to ensure there are enough
clearances for the compressor components and any accessories fitted.
o
It is possible to undo the screws on one side of
the compressor and rotate the body of the
compressor to give better access to the base-
plate.
o
After securing the base-plate the screws must
be re-installed.
o
Place the bracket on the desired mount location and mark the position of 4 holes for mounting
fasteners.
o
Drill 4 x 6.5 mm (for M6 bolts) or 8.5mm (for M8 bolts) holes on the marked locations.
Do not drill greater than 9 mm.
o
Fit the backing plates (supplied loose in the compressor box), if required to support the underside of
the mounting surface.
o
Secure the base-plate and bracket backing plates (F-25479) to the vehicle using M6 or M8 bolts,
spring washers and nuts (not included with the compressor). If using M6 bolts, ensure the washers
adequately cover the base-plate surface.
