TJM Pro Series Single Air Compressor: Installation and User Manual
For product warranty please refer to our website www.tjm.com.au
File: F-17800
Page 16 of 19
10/12/2021
6.0
Operating Instructions
6.1
Pro Locker activation
o
Switch on the compressor from the actuator switch.
o
The compressor will pressurise to approximately 120 PSI and then automatically switch off.
o
Use the Pro Locker actuation switches to engage and disengage the Lockers as needed.
o
When system pressure drops below 90 PSI the compressor will automatically switch on.
o
After use switch off both the Locker switches and the compressor switch.
6.2
Tyre inflation
o
Connect the hose for tyre inflation to the compressor using the ¼” BSPT port with a
quick-connect
fitting (supplied in TJM Airline Kit).
o
Switch on the compressor from the actuator switch.
o
The compressor will pressurize to 120 PSI and then automatically switch off.
o
Connect the tyre chuck to the tyre valve to inflate. The compressor with automatically restart to
supply air once the tyre is connected.
o
Check desired pressure is reached using a tyre pressure gauge. Note: measure the pressure with no
air-flow to the tyre for accurate reading.
o
After use switch off the compressor.
6.3
Safety information
o
The compressor will become
very hot
during use. Do not touch the working end of the compressor
during or immediately after use. Wear gloves when changing the hose connection.
o
Always ensure air pressure in the compressor is discharged before installing hoses and fittings or
undertaking maintenance.
o
Do not operate the unit without the safety relief valve installed.
o
Never blow compressed air directly at people or pets. Compressed air can blow dirt particles into
the atmosphere which can irritate the skin, eyes and/or respiratory system.
o
Do not use the compressor without mounting to a solid surface.
