Installation and User Manual
Product:
TJM Pro Series Single Air Compressor
Vehicle:
Generic
Part No.
013COMPVPROS
For product warranty please refer to our website www.tjm.com.au
File: f-17800
Page 1 of 19
10/12/2021
•
Before commencing fitment read instructions and ensure all listed components are supplied.
•
It is a condition of the warranty that the product has been correctly installed by suitably qualified
personnel and is used in accordance with accompanying instructions where provided.
For product
warranty please refer to our website www.tjm.com.au
•
Estimated Fitting Time: 2 hrs
•
Treat any holes drilled into the vehicle body with rust preventative paint.
•
Holes drilled for cable routing should have a suitable sized rubber wiring grommet installed. This will
prevent damage to the cables.
•
Always place the product on a soft workspace to prevent damage prior to installation.
•
Do not mount compressor below the water-wading line of the vehicle. Refer to the vehicle manufacturer
for this specification.
•
Compressor surface becomes
very hot
during operation. Mount away from flammable materials and
avoid locations where it may be accidently touched while operating.
•
Rated for 12 V DC systems only.
