19
Installation Manual – THH
Redefine your comfort zone. ™ | www.titus-hvac.com
Section 3 - Normal Operation & Periodic Maintenance
REPLACEMENT PARTS
Factory replacement parts should be used wherever possible to maintain
the unit performance and operating characteristics and the testing
agency listings. Replacement parts may be purchased through the local
Sales Representative.
Contact the local Sales Representative before attempting any unit
modifications. Any modifications not authorized by the factory could
result in personal injury and damage to the unit and could void all
factory warranties.
When ordering parts, the following information must be supplied to
ensure proper part identification:
1. Complete unit model number
2. Unit hand connection (right or left hand) while facing the direction
of airflow at the inlet
3. Complete part description including any numbers
On warranty replacements, in addition to the information previously
listed, the project CO # that appears on the unit nameplate, is required.
Contact the factory for authorization to return any parts such as defective
parts replaced in warranty. All shipments returned to the factory
MUST be marked with a Return Authorization Number, which is provided
by the factory.
All equipment and components sold through Johnson Controls are
warranted under the same conditions as the standard manufacturer’s
warranty with the exception that the warranty period is 12 months unless
the component is furnished as warranty replacement. Parts furnished
as warranty replacements are warranted for the remaining term of the
original unit warranties.
