Titgemeyer MS 100, Руководство по эксплуатации

Страница: 12 / 45

12
Description of the riveting tool
Note The socket head screw (7) and the O-ring (8) are screwed tightly
into the grip. The socket head screw (7) must not be loosened,
else the hydraulic oil will leak.
7 Socket locking for the hydraulic oil system
head screw Opening serves as an oil inlet
8 O-Ring Sealing of the hydraulic oil system
9 Safety valve (Brass) In case of very high pressures
approx. 8 bar or more), it opens, and lets the
air out.
10 Plug serves the purpose of protection of the
thread and also against dirt
11 Swivel- serves as the connection for compressed air
joint hoses (operating pressure 6 bar)
12 Trigger — starts right-handed rotation
— triggers a riveting action
— stops left-handed rotation
13 Nose cap covered mandrel
15 Stroke is used to adjust the stroke
adjustment screw
7 Socket head closes the opening to pull back the
screw in device pneumatic rod
floor
7
8
12
13
9
10
11
15
7