TITEFLEX R105 Series, Процедура сборки

Страница: 8 / 15

PRINTED
COPY
- NOT
UNDER
REVISION
CONTROL
TITEFLEX COMMERCIAL ASSEMBLY PROCEDURE
TITLE: R105/R115/R122/R144 SERIES MEDIUM PRESSURE HOSE
AP-33
ASSEMBLIES UTILIZING TK2 FITTINGS (ABRASIVE WHEEL) Rev. G
PROPRIETARY DATA NOTICE TO ALL RECEIVING THIS DOCUMENT
The information contained in this document was developed at the private expense by Titeflex Commercial. The contents are deemed proprietary
and all patent rights are reserved. Any submission is in a spirit of confidence and acceptance is deemed to be an acknowledgment of the
confidential relationship. Information contained hereon not lawfully obtained from another source shall not be released, duplicated, used or
disclosed in whole or in part for any procurement of manufacturing purpose without the prior written permission of the president, Titeflex
Commercial.
Page 8 of 15
4.8.2 Sampling of pressure test is permitted in accordance with Table 3 except
as mentioned below. If any part is rejected, the entire lot is to be tested.
Acceptable parts shall be routed to packing/stores and shipping.
Rejectable parts shall be processed per CQP-830, CQP-833 and CQP-835.
4.8.2.1 All assemblies for Nordson require 100% pressure test. Sampling
is not allowed
TABLE 1 R115/R122 Hose Crimp/Swage Diameters
Size Crimp/Swage
Diameter
±.005
Swage Length
(Min)
Max Operating
Pressure, Room
Temp.
(PSI)
Proof Pressure
(PSI)
±100 psi
-4 .350 .426 3000 4500
-5 .404 .426 3000 4500
-6 .478 .545 2500 3750
-8 .568 .572 2000 3000
-10 .705 .668 1500 2250
-12 .800 .733 1200 1800
-16 1.057 .854 1000 1500
TABLE 2 R105/R144 Hose Crimp/Swage Diameters
Size Crimp/Swage
Diameter
±.005
Swage Length
(Min)
Max Operating
Pressure, Room
Temp. (PSI)
Proof Pressure
(PSI)
±100 psi
-4 .375 .426 3000 4500
-5 .432 .426 3000 4500
-6 .492 .545 2500 3750
-8 .585 .572 2000 3000
-10 .724 .668 1500 2250
-12 .818 .733 1200 1800
-16 1.066 .854 800 1200