Page 23
For technical questions, please call 1-888-380-0318.
Item 64806
Sa
FE
ty
W
E
lding
t
ip
S
M
aint
E
nanc
E
tig
/ Stick
control
S
Wir
E
TIG / Stick Welding
read the EntirE iMportant SaFEty inForMation section at the beginning of this manual
including all text under subheadings therein before set up or use of this product.
to prEVEnt SErioUS inJUry FroM accidEntal opEration:
turn the power Switch off and unplug the Welder before setup.
note:
Remove the protective foam and cardboard from the Welder before setup. Place the Welder on a level
surface that can bear its weight near the work area. Leave space around the Welder for proper air flow.
tig Setup
connect cables
ground clamp cable
in positive Socket
ground
clamp
tig torch
cable in
negative
Socket
tig torch
Shielding
gas Hose
1. Plug Ground Clamp Cable into Positive Socket.
Twist clockwise all the way to lock in place.
2. Plug TIG Torch Cable into Negative Socket.
Twist clockwise all the way to lock in place.
3. For connecting Shielding Gas Hose, refer to
Connect Shielding Gas
section on next page.