Titan TTL530GBC, Инструкция по безопасности и эксплуатации

Страница: 27 / 36

STOPPING ENGINE
WARNING! The cutting means will continue to rotate for some time even after the
engine has been switched off! Wait until they come to a complete stop before you
place down the petrol brush cutter and grass trimmer!
1. Release throttle interlock(21) and throttle trigger(24) to return to idle before shutting off
engine(Fig.19).
2. Set ignition switch to “STOP” position to shut off engine(Fig.20).
CUTTING
WARNING! To avoid hazards never cut vegetation with a thickness of more than
20mm! Avoid contact with stones, metal materials, glass and so on! Inspect the
blade regularly for damages, cracks or breaks! Never use a damaged blade!
WARNING! When working with the cutting blade there is always a risk of kickback
if the cutting means come into contact with hard objects! A kickback will cause
sudden stalling of the cutting means which in turn causes the uncontrolled
petrol brush cutter and grass trimmer to be forced in the direction opposite of the
cutting means' rotation at the point of the binding! Therefore keep handles clean
and free from greasy substances, and pay attention to firm stand to avoid
injuries!
1. Use the cutting blade and guard to cut weeds, brush, small trees and similar vegetation with
a thickness of up to 20 mm.
2. Never hold the unit higher than your hip. Work cautiously. The higher you hold the unit the
bigger is the risk of thrown objects or clippings(Fig.21).
22
23
24
21
Fig.19
Fig.20
43CC PETROL BRUSH CUTTER TTL530GBC