Titan TTL530GBC, Инструкция по безопасности и эксплуатации

Страница: 19 / 36

25a
25b
Remove the trimming guard (25b) from cutting guard (25a)
1)Press the button and pull out the trimming guard(25b) a bit. Do it on both side of the guard
(Fig.5a)(Fig.5b).
Note: For using the trimmer head, make sure the trimming guard (25b) has been
attached to the cutting guard (25a). For using the blade, remove the trimming
guard (25b) from the cutting guard (25a) if necessary.
25b
25a
2
4
5a 5b
Place the safety guard onto the plate(31)and tigthen the two bolts with the 5mm hex key (38).
Pay attention to the alignment of the guard(Fig.4).
25b
25a
25b
25a
40
5c
2)Insert the torx screwdriver(40) under the center buckle to disengage it, and then remove the
torx screwdriver(Fig.5c) .
.