Titan TTL488GDO, Инструкция по безопасности и эксплуатации

Страница: 28 / 36

12). Pay special attention when performing the work
close to trees and bushes. The cutting heads could
damage sensitive bark, and damage fence posts.
(See Fig. 15g)
8. HEDGE TRIMMER
1). Angle adjustment
Adjust the attachment angle to fit the growth of the
plant.
a). Pull the locking pin (C5) out. (See Fig. 16a)
b). Depress the unlock levers (C4) with one hand and
hold them in position. (See Fig. 16b)
c). Move the hedge trimmer shaft (C6) with the other
hand until the desired angle is adjusted. (See Fig. 16c)
d). Release the unlock levers (C4) when the desired
angle is adjusted. Ensure that the hook engages
between two teeth of the tooth wheel. (See Fig. 16d)
e). Make sure the unlock pin (C5) engages
automatically and the joint is secured.
2). Trimming
a). Prepare the product to required length attaching
the hedge trimmer shaft.
b). Cut and remove branches exceeding the cutting
capacity of this product using a proper pruner before
operation.
c). Always hold the product firmly with both hands on
gripping surface and handle grip (A17). Never operate
this product using only one hand.
Fig. 16b
C5
Fig. 15g
C4
C4
Fig. 16a
C6
Fig. 16c
Fig. 16d