Titan TTL488GDO, Инструкция по безопасности и эксплуатации

Страница: 22 / 36

2). Safety guard assembly
Warning: Take great care when fitting the
guard. The guard is fitted with a very sharp
cutting edge. Please note for your safety the
cutting edge is covered with a blade cover.
a). Remove the bolt and screw nut on the guard (B3).
b).Place the guard over the end of the spindle (B2)
and align the holes in the front of the guard with the
slots in the bracket on the shaft. (See Fig. 4a)
c). Insert and secure the guard by the bolt and screw
nut. Use a hex key to secure the bolt.(See Fig. 4b)
3). Grass trimmer head assembly
a). Make sure that the trimming guard (B3) has been
attached properly.
b). Attach the trimmer head (B5) onto the spindle(B2).
c). Secure the trimmer head (B5) with bumper (B7)
clockwise. (See Fig. 5)
Pole hedge trimmer
With the hedge trimmer blade and its relative
attachments correctly assembled, this product can be
used as pole hedge trimmer intended for trimming wide
and high hedges, bushes and shrubs.(See Fig. 6)
Fig. 4a
B3
B2
Fig. 4b
B3
B2
B5
B7
Fig. 5
Fig. 6