3. Place the handle (A15) onto the shaft from the top and secure it with the longer screws.
Tighten them with the hex key (E5). (See Fig. 1)
Fig. 1
A11
A15
Adjusting The Handle
Adjust the position and angle of the auxiliary handle (A15) on the upper shaft.
1. Loosen the bolts on the auxiliary handle (A15) and adjust the position. (See Fig. 2)
2. Afterward tighten the bolts.
Fig. 2
25
25CC PETROL MULTI TOOL TTK587GDO
Attachments
WARNING!
Read all the instructions carefully! Do not start the product until it is
completely assembled! Always wear gloves during assembly!
Assemble the relevant attachment to suit the intended application.
NOTE:
This product can be used with different cutting heads for different applications.
Follow the assembly steps for respective application.
Содержание TTK587GD0
Страница 1: ......