Titan TTK587GD0 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 42

background image

3. ASSEMBLING INSTRUCTIONS

WARNING!

Read all instructions carefully. Do not connect the spark plug before it is

completely assembled. Always use glove s during assembly.

INTENED USE

1. This 4 in 1 petrol multi-tool TTK587GDO is designated with an engine displacement of

25cm³. Depending on the attached accessory this product is intended to be used as:

a).

Brush Cutter:

With the cutter blade attached the product is intended to cut heavier

weeds, brush and similar vegetation.

b).

Grass trimmer:

With the line spool attached the product is intended to cut smaller types

of weed, lawn grass or similar soft vegetation. It must not be used to work on unusually
thick, dry or wet grass, e.g. pasture grass, or to shred leaves.

c).

Pole hedge trimmer:

With the hedge trimmer blade attached the product is intended for

trimming wide and high hedges, bushes and shrubs.

d).

Pruner:

With the saw chain/guide bar assembly attached the product is intended for

cutting limbs with a thickness of max. 180 mm. The product may only be used with the
guide bar/saw chain combination stated in these instructions. It is not permitted to use
other types or sizes.

2. The product must not be used for cutting other materials, such as plastic, stone, metal or

wood that contains foreign objects and must not be used outside of domestic premises.

3. Observe the technical data for the maximum cutting capacity according to the application

(see

“Technical Information”

). Do not cut plants exceeding the stated maximum

capacity.

4. This product is intended for private domestic use only, not for any commercial trade use.

It must not be used for any purposes other than those described.

Unpack

1. Unpack all parts and lay them on a flat, stable surface.
2. Remove all packing materials and shipping devices if applicable.
3. Make sure the delivery contents are complete and free of any damage. If you find that

parts are missing or show damage do not use the product but contact your dealer. Using
an incomplete or damaged product represents a hazard to people and property.

4. Ensure that you have all the accessories and tools needed for assembly and operation.

This also includes proper personal protective equipment.

5. Disconnect the spark plug connector from the spark plug.

WARNING!

Be careful with small parts that are removed during assembly or when

making adjustments. Make sure you do not lose them.

AUXILIARY HANDLE ASSEMBLY

1. Loosen the outer pre-assembled screws on the auxiliary handle (A15).

NOTE:

There are holes on the bottom side of the upper shaft above the clamp to adjust the

position of the handle.

2. Align the step guard (A11) with the screw to one of the holes in the shaft and insert the

shorter screw into the hole. Tighten it with the cross head screwdriver.

24

25CC PETROL MULTI TOOL TTK587GDO

«
...
4
5
6
7
8
...
»

Содержание TTK587GD0











































Отзывы:

Нет отзывов

Похожие инструкции для TTK587GD0

Бренд: Laser Страницы: 8

Бренд: Davey Water Products Страницы: 4

BiDi-Power Series

Бренд: tams elektronik Страницы: 16

Бренд: KEPCO Страницы: 2

Бренд: Hama Страницы: 29

SMP10C12X Series

Бренд: Altronix Страницы: 8

Бренд: OEM Tools Страницы: 4

Бренд: Mean Well Страницы: 7

Бренд: Lambda Страницы: 14

Бренд: Westfalia Страницы: 18

PowerPack T6600

Бренд: PNY Страницы: 2

Бренд: Zenit Страницы: 8

Бренд: phytron Страницы: 29

Бренд: Parkside Страницы: 109

Бренд: BGS technic Страницы: 8

Бренд: Wacker Neuson Страницы: 50

Carlyle TW12RH2

Бренд: Napa Страницы: 12

Бренд: North Star Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды