![Titan TTK550LWM Скачать руководство пользователя страница 33](http://html1.mh-extra.com/html/titan/ttk550lwm/ttk550lwm_owners-manual_1119288033.webp)
Operation
– connect a water hose to its pipe fitting
(1), and run water through it;
– sit at the operator’s position;
– lower the cutting deck completely;
– start the engine and stay in neutral;
– engage the blade and leave it to turn for
a few minutes.
Remove the grass-catcher, the rear
discharge guard, the side discharge chute
or mulching accessory (if provided), rinse
and place them where they can dry quickly.
b)
To clean the
upper part
of the cutting
deck:
– lower the cutting deck completely;
– blow a jet of compressed air to remove
any remains of grass.
Storage and inactivity for long periods
If the machine is likely to be unused for a
long period (more than 1 month), follow
the instructions in the engine manual.
Carefully remove any dry grass cuttings which may have
collected around the engine or si len cer to prevent their catching fire the next time
the machine is used!
Close the fuel tap (1). Remove the clamp (2) using pliers,
disconnect the tube (3) and empty the tank collecting all the fuel in
a suitable container. Open the tap (1) and start the motor, leaving it
running till it stops because all fuel left in the tubes and carburettor
has been used up. Reconnect the tube (3), making sure you
position the clamp (2) properly. Put the machine away in a dry,
sheltered place and preferably covered with a cloth (
page 6).
The next time the machine is used, check that there are no fuel
leaks from the tubes, fuel cock or carburettor.
Electric Start
IMPORTANT
The battery must be kept in a cool and dry place. Before a long
storage period (more than 1 month), always charge the battery, and then recharge
before using again (chapter 6).
TRANSPORTING
If the machine is transported on a truck or trailer, use ramps
with suitable resistance, width and length. Load the machine with the engine
switched off, without a driver and pushed by an adequate number of people.
During transport, close the fuel stopcock (if fitted), lower the cutting deck, engage
the parking brake and fasten the machine securely with ropes or chains to the
hauling device.
In
mor
e
detail
...
33
GB
IE
TTK550LWM by TITAN
Содержание TTK550LWM
Страница 41: ......