Titan TTK550LWM, Руководство пользователя

Страница: 22 / 42

Operation
12. SPEED CHANGE LEVER
This lever has 6 positions for the 4 forward speeds, the neutral
position «N» and reverse «R».
– To change gear, press the pedal (11) halfway down and move
the lever to the desired gear.
Reverse must only be engaged when
the machine is stopped.
Hydrostatic transmission
21. BRAKE PEDAL
In hydrostatically driven models this pedal is solely for braking
and works on the rear wheels.
22. DRIVE PEDAL
This pedal engages drive in the wheels and controls the
machine’s forward and reverse speeds.
– To engage forward drive, press it towards «F» with your
toecap. As you increase the pressure on the pedal, the
speed of the machine increases.
– Reverse is engaged by pressing the pedal with the heel
towards «R».
– The pedal automatically goes into neutral «N» when
released.
Only shift into reverse when the
machine has stopped moving.
NOTE
If the drive pedal is used, whether forwards or for reverse, the
engine stops as soon as the parking brake (2) is engaged.
23. LEVER TO RELEASE THE HYDROSTATIC DRIVE
This lever has two positions:
Position « A »: Drive engaged: for all operating conditions, when
moving and during cutting;
Position « B »: Drive released: considerably reduces the effort
required for moving the machine manually when the engine is not
running.
IMPORTANT
To avoid damage to the transmission
unit, this operation must be carried out only when the engine
has stopped with the pedal (22) on position «N».
In
mor
e
detail
...
22
TTK550LWM by TITAN
GB
IE