Operation
Mechanical transmission
Never ride the machine on slopes in neutral gear or with
the clutch out! Always engage a low gear before leaving the machine stopped
and unattended.
Hydrostatic transmission
Go down slopes with your foot off the drive pedal to use the braking effect of the
hydrostatic drive when the transmission is not engaged.
Never use reverse for reducing speed going downhill.
Control of the machine could be lost, particularly on slippery surfaces.
Emptying the grass-catcher
NOTE
This operation can only be done with the blade disengaged,
otherwise the engine stops..
The grass-catcher is full when the grass cuttings remain on the lawn. If you continue mowing
with the grass-catcher full, it may block the collector channel.
To empty the grass-catcher:
– lower the engine speed;
– go into neutral (N) (
page 22) and stop the
machine’s forward movement;
– disengage the blade (
page 20);
– engage the parking brake on slopes
(
page 20);
– hold onto the rear handle and tip up the
grass-catcher to empty it.
Emptying the collector channel.
This job must only be
performed with the engine turned off.
If the collector channel gets blocked (due to accumulated grass cuttings filling up the grass-
catcher or an excessively high speed with relation to the quantity of grass cuttings), you need
to:
– stop forward movement immediately, disengage the blade and stop the en gine;
– remove the grass-catcher;
– remove the accumulated cuttings, reaching them from the exit of the collector channel.
End of mowing
When you have finished mowing, disengage the blade, lower the engine speed and ride the
machine with the cutting deck in the highest position.
In
mor
e
detail
...
31
GB
IE
TTK550LWM by TITAN
Содержание TTK550LWM
Страница 41: ......