Titan TTK550LWM, Руководство пользователя

Страница: 20 / 42

Operation
3. BLADE ENGAGEMENT AND BRAKE LEVER
This lever has two positions, as shown on the label:
Position «
A » = Blade disengaged
Position «
B » = Blade engaged
– If the blade is engaged when safety conditions have not
been complied with, the engine shuts down.
– On disengaging the blade (Pos. «A»), a brake is
simultaneously activated which stops it rotating in five
seconds.
4. CUTTING HEIGHT ADJUSTING LEVER
This lever has several positions so the cut can be regulated at
various heights.
– To go from one position to another, move the lever sideways
and put it back in one of the stop notches.
Electric Start
5. KEY IGNITION SWITCH
This key operated control has three positions:
«OFF» everything is switch ed off;
«ON» activates all parts;
«START» engages the starter motor
– On being released at the «START» position, the key will
automatically return to «ON».
6. ACCELERATOR LEVEL
Regulates the engine’s rpm. The positions are indicated on a plate showing the following
symbols:
«CHOKE» (if fitted) = cold starting
«SLOW» for minimum engine speed
«FAST» for maximum engine speed
– The «CHOKE» position (if fitted) enriches the mixture so must only be used for the
necessary time for cold starting.
– When moving from one area to another, put the lever in a position between «SLOW»
and «FAST».
– When cutting, go to the «FAST» position.
In
mor
e
detail
...
20
TTK550LWM by TITAN
GB
IE