10
TTB804CHR
In more detail . . .
GB
EN
Intended use
Intended use
This charger is solely for the charging of batteries listed in the TECHNICAL SPECIFICATION
section.
Charging the battery pack
NOTES:
If the battery pack is very hot you must remove your battery pack
from the charger and allow time for the battery to cool down before recharging.
1) Insert the battery pack fully in the charger (1) (Fig. 1). Connect the charger to
the power supply. The indicator lights(2) on the charger show the battery status
as described in below table.
Fig. 1
Fig. 2
Green light
Status
OFF
ON
FLASHING
OFF
Charging
Battery temperature is too high
(Charging will start automatically
after cooling down).
Battery not in position/Defective battery
RED light
OFF
FLASHING
OFF
ON
Fully charged
WARNING!
The charger and battery pack are specifically designed
to work together so do not attempt to use any other devices. Never insert
or allow metallic objects into your charger or battery pack connections
because an electrical failure and hazard will occur.
