25
CAUTION:
In order to avoid uncontrollable lifting of the workpiece
and reduce blade breakage, do not turn the switch on while the
workpiece is against the blade.
CAUTION:
Do not force the leading edge of the workpiece into
the blade. The blade will deflect, reducing accuracy of cut, and
may break.
Rip or straight line cutting
> Raise the blade guard foot (6) by loosening the height adjustment knob (19).
> Measure from the tip of the blade to the desired distance. Position the straight
edge parallel to the blade at that distance.
> Clamp the straight edge to the table.
> Recheck your measurements using the workpiece to be cut and make sure the
straight edge is secure.
> Position the workpiece against the blade and place the blade guard foot against
the top surface of the workpiece.
> Secure the blade guard foot in place by tightening the height adjustment knob.
> Remove the workpiece from the blade prior to turning the scroll saw ON.
> Position the workpiece against the straight edge prior to touching the leading
edge of the workpiece against the blade.
> Slowly feed the workpiece into the blade, guiding the workpiece against the
straight edge and pressing the workpiece down against the table.
TTB545SSW
by TITAN
Product functions
In
more
detail…
GB
IE
Fig. 20
