Bend your knees when lifting the scroll saw.
> Carry the scroll saw by its base. Do not move the scroll saw by pulling on the
powercord. Pulling on the power cord could cause damage to the insulation
or the wire connections resulting in electric shock or fire.
When operating the scroll saw
WARNING:
Use the rotary tool for sanding and grinding applications only.
This product is not recommended for drilling applications.
> To avoid injury from unexpected scroll saw movement:
• Use the scroll saw on a firm level surface with adequate space for handling
and supporting the workpiece.
• Be sure the scroll saw cannot move when operated. Secure the scroll saw to
a workbench or table with wood screws or bolts with washers and nuts.
> Before moving the scroll saw, unplug the power cord from the electrical outlet.
> To avoid injury from kickback:
• Hold the workpiece firmly against the tabletop.
• Do not feed the workpiece too fast while cutting. Only feed the workpiece at
the rate the saw will cut.
• Install the blade with the teeth pointing downward.
• Do not start the saw with the workpiece pressing against the blade. Slowly
feed the workpiece into the moving blade.
• Use caution when cutting round or irregularly shaped work pieces. Round items
will roll and irregularly shaped work pieces can pinch the blade.
> To avoid injury when operating the scroll saw:
• If you are not thoroughly familiar with the operation of scroll saws, obtain advice
from a qualified person.
• Before starting the saw, make sure the blade tension is correct. Recheck and
adjust tension as needed.
• Make sure the table is locked into position before starting the saw.
• Do not use dull or bent blades.
• When cutting a large workpiece, make sure the material is supported at the
table height.
• Turn the saw OFF and unplug the power cord if the blade jams in the workpiece
while being backed out. This condition is usually caused by sawdust clogging
the line you are cutting. If this happens, turn OFF the scroll saw and unplug
the power cord. Wedge open the workpiece and back out the blade.
• Do not use if blade guard is damaged or missing.
• Do not clear away cut-off pieces until blade has stopped and the saw is turned
off.
11
TTB545SSW
by TITAN
Technical and legal
information
Getting
started...
GB
IE
