WARNING:
Remove the saw blade before installing and/or using
the rotary tool.
Fig. 10
Fig. 13
Fig. 12
18
Before you start
Connect the rotary tool to the saw
The rotary tool can be used as a handheld or stationary device. The rotary tool
connects to the motor and is operated using the ON/OFF switch and variable
speed dial on the saw.
> Open the latch (40) on the rotary tool coupler (40) of the rotray tool (27).
> Insert the inner cable into the opening (42) at the end of the motor fitting.
> Place the coupler (41) over the motor fitting. Turn the coupler to ensure a good
fit, and close the latch (40).
> Install a blade:
• Hook a blade (25) in the recess of the lower blade holder (22).
• Press down on the upper arm (39) and insert the blade into the slot on the upper
holder (5).
• Lower the blade tension lock lever (13). Make sure the blade is properly located
in the blade holders.
TTB545SSW
by TITAN
Getting
started...
GB
IE
13
22
Fig. 11
25
5
39
42
40
41
27
