WARNING:
Use the rotary tool for sanding and grinding applications
only. This product is not recommended for drilling applications.
Attach the tool to the support bracket
Use this procedure to use the rotary tool as a stationary device.
> Loosen the knob (43) on the rotary clamp.
> Insert the rotary tool (27) through the clamp and the opening in the rotary table (20).
> Tighten the knob (43) to secure the rotary tool in the clamp.
> Place the rotary table insert (44) in the opening on the rotary table.
Install rotary tools
> Place the chuck key (29) into the side keyhole of the chuck, meshing the key with
the gear teeth.
> Turn the chuck key counterclockwise to open the chuck jaws.
> Insert a rotary tool (45) (not provided) into the chuck far enough to obtain maximum
gripping of the chuck jaws.
> Center the rotary tool in the chuck jaws.
> Tighten the chuck jaws using the chuck key to ensure that the tool will not slip
while drilling.
> Remove the chuck key (29).
TTB545SSW
by TITAN
Before you start
Getting
started...
GB
IE
19
29
Fig. 15
Fig. 16
20
Fig. 14
27
44
43
45
