Titan TTB426GDO, Руководство по эксплуатации

Страница: 14 / 32

Cutter
1. ASSEMBLY INSTRUCTIONS
Your pole pruner requires installation of the guide bar, saw
chain, sprocket cover, adjustment of chain, and filling the oil
tank with lubricating oil before it is ready for operation. Do
not switch the pole pruner on until it is properly assembled.
Follow the operating instructions step-by-step and use the
pictures provided as a visual guide to easily assemble the
machine.
d). Use the screwdriver end of the multi tool (24, provided)
to turn the chain tension screw in a counter-clockwise
direction. The tension pin is moved toward the left. (See
Fig.3)
c). Spread the saw chain out with the cutting edges of the
chain pointing in the direction of rotation.
Slide the chain into the slot around the chain bar. Ensure
chain is installed in correct direction of
rotation. (See Fig.2)
1). CHAIN AND BAR ASSEMBLY
a). Use only a guide bar and saw chain according to the
technical data of the pole pruner.
b). Set the pole pruner on a suitable flat surface with the
cover facing upwards. Unscrew in counter-clockwise
direction the hex screw with Allen key (supplied) and then
remove the side cover and cover insert. (See Fig.1)
Fig. 1
Fig. 2
Fig. 3
OPERATION INSTRUCTIONS
WARNING!
Read all instructions carefully. Do not
connect the pole pruner to mains supply
power before it is completely assembled. Always use glove
s during assembly.