background image

POLE PRUNER 750W  TTB426GDO

SAFETY INSTRUCTIONS

Warnings! Read this instruction carefully before operating this pruner. 

Make sure that you are familiar with the controls and properly operate the 

machine. Following this instructions, you can reduce the risk of fire, electric shock 

and personal injury. 

GENERAL SAFETY INSTRUCTIONS

Read all safety warnings and all instructions. 

Failure to follow the warnings and 

instructions may result in electric shock, fire and/or serious injury! Save all warnings and 

instructions for future reference. The term "garden power tool" in the warnings refers to 

your mains-operated (corded) garden power tool or battery-operated (cordless) garden 

power tool!

1.   This garden power tool is not intended for use by persons (including 

children) with reduced physical, 

sensory or mental capabilities, or lack of 

experience and knowledge, unless they have been given supervision or instruction 

concerning use of the garden power tool by a person responsible for their safety.

2.

   Children should be supervised to ensure that they do not play with the garden power 

tool.

3.

   The garden power tool must be kept out of reach of children.

4.

   Store the instruction manual in a location accessible to all users of the garden power 

tool and always include the instruction manual when passing it on to other users. 

5.

   Instruct inexperienced persons on the safe use of this garden power tool using this 

instruction manual.

Work area safety

1.   Keep work area clean and well lit.

 Cluttered or dark areas invite accidents.

2.   Do not operate garden power tools in explosive atmospheres, such as in the 

presence of flammable liquids, gases or dust.

 Garden power tools create sparks 

which may ignite the dust or fumes.

3.   Keep children and bystanders away while operating a garden power tool. 

Distractions can cause you to lose control.

Electrical safety

1.   Garden power tool plugs must match the outlet. Never modify the plug 

in any way. Do not use any adapter plugs with earthed (grounded) garden 

power tools.

 Unmodified plugs and matching outlets will reduce risk of electric 

shock.

2.   Avoid body contact with earthed or grounded surfaces, such as pipes, 

radiators, ranges and refrigerators.

 There is an increased risk of electric shock if 

your body is earthed or grounded.

3.   Do not expose garden power tools to rain or wet conditions. 

Water entering a 

garden power tool will increase the risk of electric shock.

4.   Do not abuse the cord. Never use the cord for carrying, pulling or 

unplugging the garden power tool. Keep cord away from heat, oil, sharp 

edges or moving parts.

 Damaged or entangled cords increase the risk of electric 

shock.

5.   When operating a garden power tool outdoors, use an extension cord 

suitable for outdoor use.

 Use of a cord suitable for outdoor use reduces the risk of 

electric shock. 

Содержание TTB426GDO

































Отзывы: