Version 2.01 TS132/TS142/TS152 QIG
Option 2 - Brake Pedal Activation
1. With the engine running and the transmission in Neutral, apply the parking brake.
2. Press and release the brake pedal 2 times (once if it was already on when you applied the
park brake in step 1).
3. Turn off key and remove from the ignition (the vehicle will stay running).
4. Exit the vehicle, upon closing the last door, the vehicle will shut down.***
7KHYHKLFOHLVQRZLQ³5HDG\0RGH´DQGFDQEHVWDUWHGE\UHPRWH
Option 3 - Park Brake Activation
1. With the engine running and the transmission in Neutral, apply the parking brake.
2. Turn off key and remove from the ignition (the vehicle will stay running).
3. Exit the vehicle, upon closing the last door, the vehicle will shut down.***
7KHYHKLFOHLVQRZLQ³5HDG\0RGH´DQGFDQEHVWDUWHGE\UHPRWHUHDG\PRGH
REMOTE STARTING
±
ALL MANUAL TRANSMISSION MODES
1. With the engine off, press the Start button.
2. The park lights will flash and the horn will chirp once (if connected).
7KHYHKLFOH¶VLJQLWLRQV\VWHPZLOOFRPHRQ
and within 3 seconds, the vehicle will start.
4. The parking lights will flash 5 times to confirm a successful start.
5. The vehicle will run for the programmed runtime (15 minutes default).
If the vehicle does not start, see the diagnostics section on the next page for possible solutions.
*** If you press the Start button on the transmitter while the door is open, the system will go
LQWR ³,GOH PRGH´ DQG 127 VKXW GRZQ ZKHQ \RX FORVH WKH GRRU ,W ZLOO UXQ IRU WKH
programmed run time or until it is shut down by the remote. This feature is convenient if you
need to open other doors after having closed yours. ***
