Version 2.01 TS132/TS142/TS152 QIG
NEVER INSTALL A UNIT WITH THE LOOP CUT INTO A MANUAL
TRANSMISSION VEHICLE. SERIOUS INJURY OR DEATH COULD
RESULT. TITAN INNOVATIONS WILL NOT BE RESPONSIBLE FOR
ANY INJURIES OR DEATH RESULTING FROM AN INCORRECTLY
INSTALLED REMOTE STARTER. IF THE LOOP HAS BEEN CUT OR
TAMPERED WITH IN ANY WAY AND THE UNIT IS INSTALLED IN A
MANUAL TRANSMISSION VEHICLE, TITAN ACCEPTS NO
RESPONSIBILITY FOR ANY INJURIES RESULTING FROM ANY
ACCIDENTS.
PLEASE NOTE: If you have a unit that was previously installed in an automatic
transmission vehicle and the loop has been cut and you would like to install it into a
manual transmission vehicle, please contact Titan Innovations and we would be happy to
EXCHANGE the unit for you free of charge for a new unit with the loop intact and not
tampered with.
MANUAL TRANSMISSION
±
Ready Mode
7R UHPRWH VWDUW WKH YHKLFOH \RX PXVW ILUVW SODFH WKH V\VWHP LQ ³5HDG\ 0RGH´ 7KHUH DUH
different programming options for doing this. To use a method other than the default setting,
you must have your system re-programmed by an authorized dealer.
Default - Transmitter Activation
1. With the engine running and the transmission in Neutral, apply the parking brake.
2. Press and release the Start button on the remote transmitter.
3. Turn off key and remove from the ignition (the vehicle will stay running).
4. Exit the vehicle and make sure all doors are closed.
5. Press the Start button on the transmitter to shut the vehicle off.
7KHYHKLFOHLVQRZLQ³5HDG\0RGH´DQG
can be started by remote.
