Titan Leaf Pro, Руководство по эксплуатации и техническому обслуживанию

Страница: 59 / 139

General Operating Instructions
7. GENERAL OPERATING INSTRUCTIONS
SPECIAL NOTE : this section of the manual is intended as a supplement to your specific municipal or
business guidelines in leaf collection, and is not intended to be a “complete leaf collection guide” .
Training is the key to safe and proper operation of this equipment. Ensure your operation is in
compliance with all applicable codes and regulations.
7.1. ENGINE RPM
Adjust engine RPM to match working conditions. Generally, lower RPM is better for dryer and dusty
conditions.
7.2. HYDRAULIC BOOM OPERATION (IF EQUIPPED)
The hydraulic boom is fitted with three hydraulic cylinders:
Lift – Boom raise & lower
Swing – Boom in & out (left & right)
Sweep – Nozzle pivot
These controls will provide the range of motion needed to operate the machine on varying terrain and
conditions.
7.3. HYDRAULIC JACK (IF EQUIPPED)
The hydraulic jack is operated by the control lever located on the bearing doghouse. NOTE: FOR
ELECTRIC OVER HYDRAULIC SYSTEMS, THE ENGINE NEEDS TO BE RUNNING TO RAISE THE JACK.