Titan Leaf Pro, Руководство по эксплуатации и техническому обслуживанию

Страница: 48 / 139

Inspection, Service, and Maintenance
6.3.10. BLOWER HOUSING LINER REMOVAL
To remove the liner from the housing for service or replacement:
•
Disconnect safety interlock
•
Remove suction hose
•
Remove fan cover face plate on inlet side
•
Loosen & remove the eight bolts that hold the liner in place.
•
Puller liner out.
6.3.11. SUCTION HOSE
To increase the life of the suction hose, the hose should be loosened, removed, and rotated ¼ turn every 40
hours of operation. Inspect liner plate & fan for wear at this time.
6.3.12. HYDRAULIC SYSTEM (IF EQUIPPED)
FILTER: The hydraulic filter is equipped with an indicator gauge. Change filter accordingly.
OIL: The hydraulic oil should be changed annually. System capacity is approximately 10 gallons.
6.3.13. WETTING SYSTEM (IF EQUIPPED)
The wetting system is equipped with a 30 mesh strainer screen. Check the screen every 40 hours or as
necessary, and clean as needed.
When the machine will be stored or parked in freezing temperatures, the pump and strainer need to be
drained. To drain, shut off tank valve, and disconnect right hand pump fitting. Operate pump until line is
empty. Shut off pump, and empty strainer canister.
6.4. ELECTRICAL SYSTEM
6.4.1. WIRING DIAGRAMS
The following pages show a complete system electrical schematic. Following the complete schematic,
diagrams with part numbers illustrate how the leaf vacuum electrical system is broken down into individual
harness assemblies. Use this as a reference when ordering replacement harnesses.