EN
08
TTB888SDR
Safety information
Getting
started...
Safety warnings
f) Double check that the accessories and attachments
load condition will be helpful to identify any problems.
g) Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more secure than
by hand.
h) Keep the handles dry to ensure safe control. Grip the
product securely so you have full control at all times.
i) Ensure that the air vents are always unobstructed
and clear. Clean them if necessary with a soft brush.
Blocked air vents may lead to overheating and damage
the product.
j) Switch the product off immediately if you are disturbed
while working by other people entering the working
area. Always let the product come to complete stop
before putting it down.
k) Do not overwork yourself. Take regular breaks to
ensure you can concentrate on the work and have full
control over the product.
l) Always keep the power cord behind the power tool.
WARNING!
Contact with or inhalation of harmful
/ toxic dusts arising from sanding lead-based
painted surfaces, woods and metals can endanger
the health of operator and bystanders!
The following information applies to professional
users only but is good practice for all users:
ADDITIONAL SAFETY WARNING FOR
CONSTRUCTION DUST
MNL_300W Random Orbit Sander_MROS300_IMGB_V1_211231.indd 8
12/31/21 11:46 AM
