EN
25
EN
In
more
detail...
TTB888SDR
Product functions
Intended use
This Random Orbit Sander MAC MROS300 is designated with a rated input of
300 Watts.
surfaces. This product should not be used on other materials or those harmful to
health. It is to be used for dry operation only without water or other cooling liquids.
operation and to observe all the instructions therein.
This product is intended for private domestic use only, not for any commercial
trade use. It must not be used for any purposes other than those described.
Speed dial
WARNING!
Always switch the product off and disconnect it from power
supply before making any adjustments!
1. Limit the maximum speed using the speed dial (3).
2. Turn the speed dial (3) left (as seen from the operators position) to increase
3. Turn the speed dial (3) right (as seen from the operators position) to decrease
the maximum speed (Fig. 9). A lower setting is suitable for sanding with
coarse-grained sanding belts to remove paints and varnishes.
1
3
Fig. 8
1
3
Fig. 9
Switching on/off
Make sure that you are able to press the On/Off switch without releasing the
handle(2).
MNL_300W Random Orbit Sander_MROS300_IMGB_V1_211231.indd 25
12/31/21 11:46 AM
